Steps to Prepare your Lawn Mower for Spring

March 21st, 2014 by lawnadmin Leave a reply »

During the winter months, you probably prepped your lawn mower to keep it safe for the winter months. Now as the weather warms and the grass begins to grow, you want your lawn mower to work as well as it did last season. Here are a few steps to get it back in prime shape.

Clean the Lawn Mower

After months being tucked away in a shed, dirt and debris can start to accumulate. Clear away any leaves or other material caught in the blades. The only equipment you need for this job is a pair of protected hands. No water, metal or sharp equipment is necessary.¬†Always check that the lawn mower can’t start as you’re cleaning it.

Do a Gas Check

If the gas has been sitting in the tank all winter, you may have difficulties starting it up, even if the tank is full. For winter preparation, it’s always best to hibernate your lawn mower with an empty tank so your gas doesn’t waste. Fill the tank with fresh gas before firing her up.

Check the Spark Plugs

The spark plug makes it possible for the engine to start. If the spark plugs on your lawn mower are dirty or rusted, then you should clean or replace them. You can clean them by first removing them from the lawn mower. Next, use a cleaner and let it soak for a few minutes. With a wire brush, clean the loosened residue.

If your spark plugs have rusted and it’s not possible to clean them, then you should replace them for optimal performance. Always replace with spark plugs that fit your lawn mower. You can figure this out by reading the model number on the old version.

Sharpen the Blades

If you feel that the blades are dull, you can remove the blades from the lawn mower and sharpen them yourself. If this is your first time, search Youtube for a huge selection of videos instructing you on how to sharpen lawn mower blades. If you don’t think you can sharpen them yourself, you can take it to a specialist at a hardware store and pay a small fee.

Change the Oil

You will need to change the oil on a riding lawn mower after removing it from storage. This step is also important for some push mowers. The engine should be warm before you do this; but you don’t want to run out of oil while you are running the mower. Look at the dipstick and if there is no oil registering, add the type and amount that’s recommended by the manufacturer.


Leave a Reply

You must be logged in to post a comment.